对环氧化反应具有高催化活性的钛硅介孔分子筛的制备

 使用短链二元羧酸（包括草酸、戊二酸、柠檬酸和酒石酸）为模板剂，采用溶胶－凝胶法合成了具有大比表面积，孔径在3～7nm的钛硅介孔分子筛．EDX和紫外可见漫反射光谱的研究结果表明，所合成的钛硅介孔分子筛中钛的分布均匀，钛物种以孤立态四面体构型为主．本方法所合成的钛硅介孔分子筛对环己烯环氧化反应具有很高的催化活性和选择性．     

纯硅MCM-41中孔分子筛合成因素的研究Ⅰ.Na~+、K~+阳离子对合成的影响

本文采用表面活性剂十六烷基三甲基溴化铵（Ｃ１６ＴＡＢｒ，以下为１６３１），在（Ｎａ，Ｋ）ＯＨＳｉＯ２Ｃ１６ＴＡＢｒＨ２Ｏ体系中分别利用室温、水热及干粉法进行了纯硅ＭＣＭ４１中孔分子筛的合成，考察了阳离子Ｎａ＋、Ｋ＋对ＭＣＭ４１合成及稳定性的影响。通过ＸＲＤ对结晶度的测定，发现ＮａＭＣＭ４１的晶化速率明显高于ＫＭＣＭ４１，而热稳定性和水热稳定性较差，且ａ０值小于后者。同时发现，就合成方法而言，室温法得到的产物具有很高的结晶度，利用水热法合成的样品的热稳定性明显较高，而干法得到的分子筛产品具有优良的水热稳定性。     

Growth Mechanism of Large Monodispersed Silica Particles Prepared from Tetraethoxysilane in the Presence of Sodium Dodecyl Sulfate

Monodispersed silica particles up to ca. 1.2 μm in diameter were prepared by hydrolysis of tetraethoxysilane in the presence of sodium dodecyl sulfate (SDS). The particle size was increased with an increase of SDS added. The geometrical standard deviation of the particles was decreased with an increase of SDS. In the earlier reaction stage, double spherical particles by the coalescence of the particles were frequently observed when large amounts of SDS were added. Particle size was gradually increased after the coalescence occurred and spherical particles were finally obtained. The results of Nielsen’s chronomal analysis suggest that the polynuclear layer growth took place after the coalescence of the particles in the presence of larger amount of SDS.     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ti-Si复氧化物载体对金催化剂上丙烯环氧化的影响

 以TiCl4和SiCl4为原料,采用水解和非水水解溶胶-凝胶两种方法制备了一系列不同Ti含量的Ti-Si复氧化物载体,继而用沉积-沉淀法制得载金催化剂. 采用X射线衍射、紫外-可见漫反射光谱、 N2吸附和高分辨透射电镜对催化剂进行了表征,并考察了催化剂在氢气和氧气存在下的丙烯气相环氧化催化性能. 研究表明,钛含量在6%～14%范围内时,两种方法制得的Ti-Si复氧化物均为无定形结构,但采用非水水解溶胶-凝胶法制得的载体比表面积较高. 以非水水解溶胶-凝胶法制备的钛含量10%的Ti-Si复氧化物为载体得到的载金催化剂表现出较高的活性和选择性,反应60 min时,丙烯转化率为5.7%, 240 min后降为3.3%, 环氧丙烷的选择性稳定于95%左右. 还考察了非水水解溶胶-凝胶的陈化时间和金沉积-沉淀溶液的pH值等对反应结果的影响.     

介孔Co3O4-CeO2复合氧化物的制备及在CO选择性氧化中的应用

以硝酸钴和硝酸铈为前驱物，SBA-15为硬模板，利用双溶剂法制备了Co3O4-CeO2介孔复合氧化物，通过X-射线衍射、N2吸脱附测试、程序升温还原和透射电子显微镜等技术对活性组分及载体进行了表征，并且与浸渍法和共沉淀法所制备的催化剂进行了对比分析。结果表明，相比于浸渍法和共沉淀法，采用双溶剂法制备的介孔Co3O4-CeO2复合氧化物具有均匀的介孔结构、较小的颗粒尺寸、较大的比表面积和较高的活性组分分散度。此外，CO氧化脱除评价显示与常规的共沉淀法和浸渍法所制备的催化剂相比该介孔复合氧化物具有较高的反应活性和选择性，其高活性主要归因于较高的比表面积和活性组分的高分散度。     

On Aging of Acid-Catalyzed Silica Sols—A Dynamic Light Scattering Study

Dynamic light scattering experiments in acid-catalyzed silica sols are discussed. It is shown that in spite of limited parameter accuracy and limited absolute knowledge of the particle sizes, the scattering data from various experiments are comparable with one another and give information about structural differences. Measurements at various angles indicate changes between non-spherical and nearly spherical particles and allow the estimation of gelling times before gelation.     

介孔混合氧化物催化剂La-Co-Zr-O的制备与表征

 采用柠檬酸络合-有机模板剂分解法制备了(La+Co)/(La+Co+Zr)原子比为0.5的La-Co-Zr-O催化剂,并与传统的共沉淀法制备的La-Co-Zr-O催化剂进行比较. N2物理吸附结果表明,采用模板剂法制备的催化剂样品具有较大的比表面积(96.6～117.6 m2/g)和十分均匀的孔径(3.5～4.3 nm); X射线衍射、X射线光电子能谱和X射线吸收精细结构表征结果一致表明,催化剂中活性组分主要为高分散的Co3O4微晶(粒径为23～33 nm), 模板剂法制备的催化剂中所有组分的分散性均优于共沉淀法制备的催化剂. 程序升温还原实验结果表明,采用聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵为混合模板剂制备的催化剂中Co3O4更容易被还原. Co-O 键的活动度与催化剂催化氧化反应的活性密切相关.